I have had this idea long time ago "The Coffee Cup Sphere Lamp"!
I just saw the same idea posted in another blog and remembered this idea.-300+ coffee cups from paper or plasic
-a stapler with staples or glue
-electric wire with attached socket
-energy-efficient lamp with normal lamps (I'm afraid the heat will melt the plastic)
-some (3 or more) pinbolds
-big washer
-small washers
-a heatsource (a lighter or something like that)
-A sharp metal pen (for instance a scriber) with the thickness of the wire
OK start with stapling three cups together, this will be your base around which you will build the rest.
Stapling the staples nearest to the bottom first will work the best. If you are start with stapling the upper first the plastic will rip.
So you have the base, now you can build on around it.
Because of the tapered form of the cups you will end up automatically with a sphere (kind of).
Weave the edges under and over each other, as you can see in the picture of the base.
There is not much to say about the ongoing just staple on until you have got blisters on your fingers!
Just leave one hole open for the last cup.
So now you take the last cup, heat up your scriber and burn a hole in the bottom. Place the big washer under the underside, tie a knot in the electrical wire and put it through the hole from the outside. Attach it with the split bolts trough some holes (which you will have to melt with the scriber first off course) with the small washers in between to prevent them slipping through. Now you can easily remove the cup if the lamp is broken.
Your lamp is finished. Hang it on the ceiling and put the wires on the electricity.
Be careful with that!
Let it burn!



















